Mobile Home Disposal: Free Removal & Site Cleanup Nationwide

It depends on the material. Steel framing and chassis go to licensed scrap metal recyclers. Copper wiring and plumbing go to copper processors. Aluminum siding and roofing go to aluminum recyclers. Intact appliances and fixtures may go to used-goods buyers. Non-recyclable materials — deteriorated wood, insulation, drywall — are transported to state-licensed C&D landfills. We separate materials during deconstruction specifically to maximize recovery and minimize what goes to landfill.

Steel from mobile homes is highly recyclable — recovery rates above 85 to 90 percent by weight are common when properly sorted. Copper is nearly 100 percent recyclable and carries the highest per-pound scrap value. Aluminum siding and roofing recovers at 80 to 90 percent or better when separated cleanly. Dimensional lumber has a secondary market when dry and intact; treated or water-damaged wood typically does not. Fiberglass insulation, vinyl materials, and drywall have low or no recyclable value and go to landfill.

Licensed disposal contractors are required by state environmental agencies to use certified C&D landfills and permitted recycling facilities. We can provide disposal documentation on request, including facility identification and weight tickets. If you need disposal proof for an estate settlement, property sale, or personal records, ask when you apply and we will confirm what documentation we can provide for your state and project.

Each has its own regulatory requirement. Asbestos: pre-demolition inspection required; licensed abatement removes friable material under EPA NESHAP before main demolition begins. Refrigerant in HVAC systems: Section 608 of the Clean Air Act requires certified technicians to recover refrigerant before equipment is disturbed. Underground or above-ground oil tanks typically require a separate licensed tank removal contractor and sometimes a soil assessment. We identify these conditions during the pre-demolition review and coordinate certified contractors accordingly.

Yes. Legal disposal must meet several EPA frameworks: NESHAP standards for asbestos-containing materials during demolition, Section 608 of the Clean Air Act for refrigerant recovery from HVAC equipment, and RCRA guidelines for any materials classified as hazardous waste. C&D debris disposal is primarily regulated at the state level — each state has specific licensing requirements for disposal facilities. We operate under these requirements and can describe our compliance approach for your property and state.

Standard project close-out documentation includes a completion notice confirming the structure has been removed, utility disconnect certifications from each provider, and an asbestos inspection report if one was performed. If a demolition permit was required, permit closure documentation comes from your local jurisdiction after final inspection sign-off. We provide these as part of the project handoff. Owners who need a written statement confirming removal for sale or estate purposes receive that as standard.

Most disposal projects complete within eight to ten weeks from application to final site cleanup. The timeline is driven by title verification, local permit processing, and crew scheduling — not physical demolition, which typically takes one to three days on-site. County permit processing alone can take one to three weeks. We move as quickly as the local permitting process allows and keep you informed at every stage.

Apply in 30 seconds to see if your property qualifies — teardown, haul-off, and site cleanup at no cost to qualifying owners.